Flat and low-slope roof leaks
Ponding, seams and parapet flashing
Skylights leak at the flashing kit or the perimeter seal far more often than through the glass itself. The unit sits proud of the roof plane and interrupts the water path, so everything depends on how the flashing was stepped into the surrounding courses. Water showing at the corners of the opening inside is the classic sign. Condensation on the inside of the pane is a different problem entirely — that is ventilation, not a leak, and sealing the outside will not touch it.
Call (706) 696-1888Each area has its own page for skylight leaks.
No. Moisture on the room-side face of the glass is warm damp air meeting a cold surface, and it is a ventilation problem. Moisture trapped between the panes means the sealed unit has failed and the glazing needs replacing. Neither is fixed by working on the roof.
If the unit itself is sound it can be reflashed, which is far cheaper. Replacement makes sense when the frame has rotted, the seal between panes has gone, or the unit is old enough that matching flashing is no longer available.
Ponding, seams and parapet flashing
The secondary barrier under the covering
The metal at the roof edge
Cedar shake roofs
Single-ply flat roof membrane
What repairs actually cost here
Most metro Atlanta leaks trace back to a storm that did not look like it caused damage. The shingles are still there, the roof looks fine from the driveway, and water is getting in anyway. Finding where is the job.
Call (706) 696-1888